SteamFlo™ Flow Meters

Unique Features

No straight runs of pipe required for measurement
Non-contact sensor electronics
Electronic signal conditioning circuit
Digital flow rate and total indication in Lbs./Hr. or selected weight/time base
Proportional analog output is two-wire
Pre-calibrated from the factory for fast installation and start-up

Applications

Saturated Steam
Superheated Steam

Description

The SteamFlo flow meter is idealy suited for saturated steam flows in pipe sizes from 1/2" up to 4". The stainless steel housing is corrosion resistant to most chemicals and is high temperature resistant. The SteamFlo flow meter is a flow meter and transmitter which is microprocessor based, two-wire 4-20 mA or 0-5Vdc output. It combines our time-proven VA technology with the high level technology of today.

The SteamFlo flow meter offers NPT, Flanged, Welded or custom pipe connections. The wide flow range and small pressure drop makes the SteamFlo the ultimate energy monitor. Highly accurate calibration over the entire flow range (better than +/- 2%) and low maintenance measuring device with no springs, cams or dynamic seals to wear out make this the perfect work horse for your steam metering application.

Specifications

Accuracy: +/- 2% of flow rate
Repeatability: +/- 0.5% of flow rate
Materials: T-316 stainless steel, Geothermal EPR O ring & Teflon coated Alnico magnet
Max. Temperature: 500°F (260°C)
Max. Pressure: 600 PSIG (41.37 BAR)
MFT Enclosure Rating: NEMA 4, 12, 13 (IP 57/52/54)
Max. Temperature Electronics: 2400F (1160C)
Power Requirement: 10-30 VDC - 25 mA Max. Power Consumption
Display: Rate & Total = 8 digit 0.70" high numeric and 8 digit 0.35" high alpha for units and menu
Temp. Drift: 50 ppm/°C (Max)
SteamFlo Quick Sizing Chart