EchoPod Ultrasonic Level Switch, Controller and Transmitter for low-cost, non-contacting monitoring and/or controlling of small tanks
Unique Features
- Multi-function sensor provides 4-20 mA measurements, switch and control functions
- Compact sensor with 2" beam width and 2" deadband optimized for small tank applications
- Four IA relays programmable for switch or advanced pump or valve control and fail-safety
- Rugged PVDF transducer and polycarbonate enclosure rated 6P for corrosive applications
- Priced the same or less than floats, capacitance and resistive rods
- WebCal® Software makes EchoPod configuration fast and east
Description
EchoPod is a general purpose non-contact ultrasonic level switch, controller and transmitter for small tanks 49.2" (1.25 m) or less. Maintenance free, the EchoPod reduces tank system hardware through simplicity and consolidation. It is well suited for corrosive and dirty applications with its non-metallic housing and transducer.
|
Range: |
49.2" (1.25m) |
|
Accuracy: |
0.125" (3 mm) |
|
Resolution: |
0.019" (0.5 mm) |
|
Dead band: |
2" (5 cm) |
|
Supply voltage: |
24 VDC (loop) |
|
Loop resistance: |
400Ω max |
|
Consumption: |
35 mA maximum |
|
Signal output: |
4-20mA, two-wire (when loop powered) |
|
Contact type: |
(4) SPST relays 1A |
|
Loop fail-safety: |
4 mA, 20 mA, 21 mA, 22 mA or hold last |
|
Relay fail-safety: |
Power loss: Hold last Power on: Open, close or hold last |
|
Hysteresis: |
Selectable |
|
Configuration: |
WebCal® PC Windows® software interface |
|
Temp. comp.: |
Automatic over range |
|
Temperature: |
F: -4° to 140° C: -20° to 60° |
|
Pressure: |
Atmospheric |
|
Enclosure: |
NEMA 4X encapsulated, corrosion resistant & submersable |
|
Encl. material: |
PC/ABS FR |
|
Strain relief mat.: |
Santoprene |
|
Trans. material: |
PVDF |
|
Cable length: |
4'(1.2m) |
|
Cable jacket mat.: |
PVC |
|
Process mount: |
1" NPT (1" G) |
|
Mount. gasket: |
Viton® |
|
Classification: |
General purpose |
|
Approvals: |
CE |
Typical Applications
- Ideal for corrosive or non-corrosive liquid level monitoring and control.
- The sensor is well suited for a wide range of corrosive, sticky or dirty type media.
- The EchoPod is broadly selected for small atmospheric tank, IBC, drum, skid or process vessel and sump applications.
Accessories
EchoPod Programming FOB
The EchoPod programming FOB is designed for programming the EchoPod level transmitter/switch/controller with easy-to-use WebCal software (comes free with purchase of programming FOB). Simply wire the EchoPod to the programming FOB and plug it into your PC via the standard USB port and the installed software will instantly recognize the EchoPod to be programmed. Set-up takes minutes.
Accessory: Mounting Bracket
LM50 Side Mount Bracket - Wall Mount
Mount any 2" NPT transducer - Allows 3" clearance from wall - Perfect for Flow Line Options' 3 inch beam angle. LM50-5001-01 bracket for EchoPod 1" NPT
