EchoPod Plus 2.5m Ultrasonic Level Switch, Controller and Transmitter
Unique Features
- Multi-function sensor provides 4-20 mA measurements, switch and control functions
- Compact sensor with 2" beam width and 4" deadband optimized for small tank applications
- 4 relays programmable for switch or advanced pump or valve control and fail-safety
- Rugged PVDF transducer and polycarbonate enclosure rated 6P for corrosive applications
- WebCal® Software makes EchoPod Plus configuration fast and easy.
- Control/switch point functions include:
- 2 pumps with 2 alarms
- 1 pump with 3 alarms
- 2 pumps (lead-lag) with 2 alarms
- 2 pumps (duplexing) with 2 alarms
- 4 independent switch point alarms
Description
This general purpose, ultrasonic sensor provides non-contact level detection up to 98.4" (2.5m) with 4 SPST 60 VA 1A relays and a two-wire 4-20 mA level measurement output. Each relay can be configured on a single set point alarm or latched on two sets for automatic fill or empty in simplex or duplex control modes with fail-safe logic. The embedded controller can replace external control hardware. The sensor is well suited for a wide range of corrosive, sticky or dirty type media. EchoPod Plus is broadly selected for day tanks, sumps, IBC totes, lift stations and mini-bulk storage applications. To configure EchoPod Plus, download the free WebCal software and purchase one USB interface tool.
|
Range: |
98.4" (2.5m) |
|
Accuracy: |
+/- 0.2% Range |
|
Resolution: |
0.019" (0.5 mm) |
|
Dead band: |
4" (10 cm) |
|
Supply voltage: |
24 VDC (loop) |
|
Loop resistance: |
400Ω max |
|
Consumption: |
0.5W |
|
Signal output: |
4-20mA, two-wire (when loop powered) |
|
Contact type: |
(4) SPST relays 1A |
|
Loop fail-safety: |
4 mA, 20 mA, 21 mA, 22 mA or hold last |
|
Relay fail-safety: |
Power Loss: Hold last; Echo loss: Open, Close, or Hold Last |
|
Hysteresis: |
Selectable |
|
Configuration: |
WebCal® PC Windows® software |
|
Temp. comp. |
Automatic over range |
|
Process temp. |
F: 20° to 140°C: -7° to 60° |
|
Ambient temp. |
F: -31° to 140°C: -35° to 60° |
|
Max. working pressure |
30 PSIG |
|
Enclosure: |
Type 6P, Encapsulated, Corrosion Resistant & Submersible |
|
Encl. material: |
PC |
|
Strain relief mat.: |
Santoprene |
|
Trans. material: |
PVDF |
|
Cable length: |
48"(1.2m) |
|
Cable jacket mat.: |
Polyurethane |
|
Process mount: |
1" NPT (1" G) |
|
Mount. gasket: |
Viton® |
|
Classification: |
General Purpose |
|
Approvals: |
CE |
|
Compliance |
RoHs |
Typical Applications
- The sensor is well suited for a wide range of corrosive, sticky or dirty type media.
- EchoPod Plus is broadly selected for day tanks, sumps, IBC totes, lift stations and mini-bulk storage applications
Accessories
EchoPod Programming FOB
The EchoPod programming FOB is designed for programming the EchoPod level transmitter/switch/controller with easy-to-use WebCal software (comes free with purchase of programming FOB). Simply wire the EchoPod to the programming FOB and plug it into your PC via the standard USB port and the installed software will instantly recognize the EchoPod to be programmed. Set-up takes minutes.
Accessory: Mounting Bracket
LM50 Side Mount Bracket - Wall Mount
Mount any 2" NPT transducer - Allows 3" clearance from wall - Perfect for Flow Line Options' 3 inch beam angle. LM50-5001-01 bracket for EchoPod 1" NPT
